Belt conveyors are currently widely used in a wide range of conveyors and are found in virtually every industry. The belt conveyor has the characteristics of transporting a variety of materials, large transportation volume, stable performance, long working time, etc. It can not only transport according to the customer's transportation process requirements, but also transport materials in a rugged and complicated environment for long distances. It realizes automatic and integrated production operations; it has been widely used in mines, coal, electric power and other fields, and has become an ideal equipment for long-distance, large-capacity, and continuous transportation. For the use of the belt conveyor, it must be carried out in accordance with the relevant operating specifications. Today we will talk about the use of belt conveyors.

1. The patrolman should be familiar with the equipment performance and parameters of the belt conveyor belt length, belt length, belt speed, conveying capacity, motor rated power and rated current.

2. The belt conveyor is fully prepared before driving.

3. The start of the belt conveyor should be strictly in accordance with the operating procedures.

4. Pay attention to inspection and operation during belt conveyor operation

5, belt conveyor parking should also be more careful

6, belt conveyor safety operation precautions

6.1 When the belt does not start up or slips, it is strictly forbidden to handle it with ankle, hand, and pressure.

6.2 During the operation of the equipment, it is strictly forbidden to clean, touch the running parts and cross the belt; it must not pass under the belt frame without safety devices, all safety shields and safety ropes must be safe and reliable.

6.3 After the belt has stopped, the central control operator must be confirmed by the on-site inspection personnel before being safe.

6.4 It is forbidden to clean the roller crust during the running of the belt. When it is necessary to clean the belt, the belt must be powered off or the switch should be placed in the “inspection” position before standing on the side for cleaning. It is strictly forbidden to put the hand or other parts of the body. Extend into the drum.

6.5 When the machine is shut down for maintenance, the power must be turned off and the transfer switch should be placed in the “inspection” position.

6.6 When replacing the belt idler, the belt must be powered off and the transfer switch should be placed in the “inspection” position.

6.7 In the high-altitude belt conveyor corridor inspection, walking handrails, pay attention to safety under the feet.

6.8 It is strictly forbidden to stand on the belt.